Owner’s Manual
Please read before using this unit

DVD/CD Player with Video Cassette Recorder
DV225MG9
Supplied Accessories
remote control unit
RCA audio/video cables
(NB622UD /
(WPZ0102TM018 /
NB672UD)
WPZ0102LTE01)
batteries
owner’s manual Owner’s Manual
(AA x 2)
(1VMN25153)
Connecting to RF Modulator (Not Supplied)
If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using an RF modulator. In this case, follow the instructions below

1)Disconnect the power cords of the unit from the AC outlet

2)Make the connection as illustrated below

3)Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF modulator

4)Plug in the power cords of the unit to the AC outlet

5)Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to. For more details, follow the manual supplied with the RF
modulator

rear of this unit
AUDIO OUT
DVD/VCR
L
RCA audio cable
R
VIDEO OUT
RCA video cable
rear of TV
ANT. IN
VHF / UHF
rear of your
modulator
antenna
RF coaxial cable
or
cable TV
RF coaxial
VIDEO IN
TO TV
cable
company
Set channel 3 or 4
Note:
•RF modulator is not supplied with this unit. You need to purchase this separately

•The picture quality may suffer if this unit is connected to an RF modulator

© 2008 Funai Electric Co., Ltd

Contents
PRECAUTIONS
Laser Safety

2
Important Safeguards

3
Location and Handling

4
Avoid the Hazards of Electrical Shock and Fire

4
Moisture Condensation Warning 

4
About Copyright

4
Notice for Progressive Scan Outputs 

4
Symbols Used in This Manual 

4
Maintenance 

4
About Cassette Tapes and Discs 

5
Playable Media 

5
Unplayable Discs 

5
SETUP
Connections

6
Connection to a TV 

6
Connection to an Audio System

7
Connection to an External Tuner 

7
Preparation for Use 

8
Turning on Unit for the First Time 

8
Clock Setting 

8
Function Overview 

9
Front Panel Indicator Lights 

9
Selecting DVD or VCR Operation

9
Front & RRear Terminals 

9
Remote Control

10
Installing the Batteries for the Remote Control 

10
VCR FUNCTIONS
Playback 

11
When You Playback a Cassette Tape Recorded in Hi-Fi Stereo 

11
Other Operations

11
Index Search 

11
Time Search 

11
Auto Repeat

12
Recording

12
Recording & OOne-touch Timer Recording (OTR

12
Timer Recording 

12
Notes for Timer Recording &One-touch Timer Recording (OTR) 

13
Satellite Link 

14
Copying a Cassette Tape 

14
DVD FUNCTIONS
Playback 

15
On-Screen Display 

16
Search Functions 

17
Using Track Search

17
Using Title / Chapter Search

17
Using Time Search 

17
Marker Setting 

17
Repeat / Random / Programmed Playback 

18
Repeat Playback

18
Repeat A-B Playback 

18
Random Playback

18
Programmed Playback 

18
Special Settings 

19
Subtitle Language

19
Audio Language 

19
Camera Angles 

19
Black Level Setting 

19
Stereo Sound Mode

19
Virtual Surround

19
DVD Setting 

20
LANGUAGE Setting 

20
DISPLAY Setting 

21
AUDIO Setting 

21
PARENTAL Setting

22
OTHERS Setting 

22
Reset to the Default Setting (Except for PARENTAL Setting

23
INFORMATION
Troubleshooting Guide 

23
Specifications 

24
Language Code List 

24
LIMITED WARRANTY

24
Español 

25
Quick Use Guide

27
Español INFORMATION DVD FUNCTIONS VCR FUNCTIONS SETUP PRECAUTIONS
PRECAUTIONS
PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

The caution marking is located on the rear of the cabinet

Laser Safety
The lightning !ash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated Òdangerous voltageÓ within the productÕs enclosure that may be of su"cient magnitude to constitute a risk of electric shock to persons

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM

LOCATION: INSIDE, NEAR THE DECK MECHANISM

RADIO-TV INTERFERENCE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1)Reorient or relocate the receiving antenna

2)Increase the separation between the equipment and receiver

3)Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

4)Consult the dealer or an experienced radio/TV technician for help

This Class B digital apparatus complies with Canadian ICES-003

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT

ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LALA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND

A NOTE ABOUT RECYCLING
This productÕs packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes

Make your contribution to the environment
¥Used up batteries do not belong in the dust bin

¥You can dispose of them at a collection point for used up batteries or special wastes. Contact your council for details

For Customer Use:
Read carefully the information located at the back of this unit and enter below the Model No. and the Serial No. Retain this information for future reference

Model No. 
Serial No. 
– 2 –
EN
Important Safeguards
1.Read Instructions - All the safety and operating instructions should be read before the appliance is operated

2.Retain InstructionsThe safety and operating instructions should be retained for future reference

3.Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to

4.Follow Instructions - All operating and use instructions should be followed

5.Cleaning - Unplug this video product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning

EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5

6.Attachments - Do not use attachments not recommended by the video product manufacturer as they may cause hazards

7.Water and MoistureDo not use this video product near water, for example, near a bath tub, wash bowl, kitchen sink,
or laundry tub, in aor near a swimming pool, and the like

8. Accessories - Do not place this video product on an unstable cart, stand, tripod,
bracket, or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufac-
turer, or sold with the video product. Any mounting of the appliance should follow the manufacturer's instructions and should use a mounting accessory recommended by the
manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn

9.Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the video product and to protect it from overheating, and these openings must not be blocked or covered

The openings should never be blocked by placing the video product on a bed, sofa, rug, or other similar surface. This video product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or the manufacturer's instructions have been adhered to

10.Power Sources - This video product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions

11.Grounding or Polarization - This video product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electri-
cian to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug

12.Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance

13.Lightning - For added protection for this video product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the video product due to lightning and power-line surges

14.Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal

15.Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock

16.Object and Liquid Entry - Never push objects of any kind into this video product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the video product

17.Servicing - Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel

18.Damage Requiring Service - Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a.When the power-supply cord or plug is damaged

b.If liquid has been spilled, or objects have fallen into the video product

c.If the video product has been exposed to rain or water

d.If the video product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the video product to its normal operation

e.If the video product has been dropped or damaged in any way

f.When the video product exhibits a distinct change in performance this indicates a need for service

19.Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteris-
tics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards

20.Safety Check - Upon completion of any service or repairs to this video product, ask the service technician to perform
safety checks to determine that the video product is in proper operating condition

21.Heat - This video product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat

PRECAUTIONS
Ð 3 Ð
EN
PRECAUTIONS
Location and Handling
•Do not stand this unit up vertically. Install this unit in a horizontal and stable position. Do not place anything directly on top of this unit. Do not place this unit directly on top of the TV

•Depending on the TV, noise or disturbance of the picture and/or sound may be generated if this unit is placed too close to your TV. In this case, please ensure enough space between your TV and this unit

•Do not cover or place this unit in enclosed spaces to prevent excessive temperature build up

•Do not place this unit in direct sunlight, or near heat sources

•Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction

•Keep this unit away from strong magnetic objects

•Do not place any object containing water or other liquids on this unit. In the event that liquid should enter the cabinet, unplug this unit immediately and contact the retailer or an authorized service center immediately

•Do not remove this unit cabinet. Touching parts inside the cabinet could result in electric shock and/or damage to this unit. For service and adjustment inside the cabinet, call a qualified dealer or an authorized service center

•Be sure to remove disc and cassette tape and unplug the AC power cord from the output before carrying this unit

Avoid the Hazards of Electrical Shock and Fire
•Do not handle the power cord withhands

•Do not pull on the power cord when disconnecting it from AC outlet. Grasp it by the plug

•If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our authorized service center for servicing

•Do not put your fingers or objects into the unit cassette holder

Moisture Condensation Warning
Moisture may form inside this unit under the following conditions:
•Immediately after a heater is turned on

•In a steamy or humid room

•When this unit is suddenly moved from a cold to warm environment. If moisture forms inside this unit, it may not operate properly or damage the cassette tape. In such case, do not use this unit at least for 2 hours until its inside gets dry

About Copyright
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights

Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited

Notice for Progressive Scan Outputs
Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 525
progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding your TV set compatibility with this 525p DVD player, please contact our customer service center

Symbols Used in This Manual
The following symbols appear in some headings in this manual

: Description refers to video cassette tapes

: Description refers to DVD-video

: Description refers to audio CD

Note to CATV system installer:
•This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground should be connected to the grounding system of the building, as close to the point of cable entry as practical

Maintenance
Servicing
•Please refer to relevant topics on the “Troubleshooting Guide” on page 23 before returning the product

•If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug, and please call our toll free customer support line found on the cover of this manual to locate an authorized service center

Cleaning the Cabinet
•Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive

Cleaning Discs
•When a disc becomesclean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion

•Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records

Cleaning the Disc Lens
•If this unit continues to perform improperly even after you have referred to the relevant sections and to the “Troubleshooting Guide” in this manual, the laser optical pickup unit may be. Consult your dealer or an authorized service center for inspection and cleaning of the laser optical pickup unit

Disc Handling
•When you handle a disc, hold it by its edge and try not to touch the surface of the disc

•Always store the disc in its protective case when not in use

Auto Head Cleaning
•Automatically cleans video heads as you insert or remove a cassette tape, so you can see a clear picture

•Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the usage of rental or worn cassette tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your unit may need to be cleaned

1.Please visit your local audio/video store and purchase a good quality VHS video head cleaner

2.If a Video head cleaner does not solve the problem, please call our toll free customer support line found on the cover of this manual to locate an authorized service center

Note:
•Remember to read the instructions along with the video head cleaner before use

•Clean video heads only when problems occur

© 2008 Funai Electric Co., Ltd

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in
any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes

with the
design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law

– 4 –
EN
About Cassette Tapes and Discs
Playable Media
Type of
Mark (logo)
Region code
Recorded
Media size
Tape speed and disc types
media
signals
cassette
tape width
SP: 1-5/16 inch/sec. (33.40 mm/sec.)
analog video
1/2 inches
tape
SLP: 7/16 inch/sec. (11.12 mm/sec.)
(12.65 mm)
DVD-video
or
*1, 2, 3, 5, 9
5 inches
DVD-RW
e.g.)
(12 cm)
title 1
title 2
DVD-R
digital video
or
*1, 3, 4, 5, 6,
(MPEG2)
chapter 1
chapter 2
chapter 3
chapter 4
chapter 1
chapter 2
7, 8, 9, 10
3 inches
(8 cm)
DVD+RW
DVD+R
*1, 3, 4, 5, 8, 9
audio CD
*3, 5, 9
5 inches
digital audio
(12 cm)
e.g.)
CD-RW
or
3 inches
track 1
track 2
track 3
track 4
track 5
track 6
CD-R
(8 cm)
*3, 4, 5, 8, 9
is a trademark of DVD Format/Logo Licensing Corporation

If you cannot play back a disc which bears one of the marks above, check the following

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back. *2: Certain DVD-video does not operate as described in this manual due to the intentions of the discÕs producers

*3: Scratched or stained discs may not be played back

*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special properties of discs

*5: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back. Even if they are played back, the sound or video quality will be compromised

*6: You may play back the unfinalized DVD-RW/-R recorded in the video format on our brandÕs DVD recorder. However, depending on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth, etc In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD recorder

*7: Only discs recorded in the video format and finalized can be played back

Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at all (the picture or sound may not be smooth, etc.)

*8: If the recorded portion of the disc is too small (less than 2-3/16 inches (55 mm) across), it may not play back properly. *9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly

*10: Discs recorded in the VR (video recording) format cannot be played back

Unplayable Discs
NEVER play the following discs as malfunction may result!
DVD-RAM, DVD-audio, CD-i, photo CD, video CD, DVD with region codes other than 1 or ALL, DTS-CD, DVD-ROM for personal computers, CD-ROM for personal computers, CD-RW/-R with MP3 files, HD DVD, Blu-ray Disc

On the following disc, the sound MAY NOT be heard. super audio CD
Any other discs without compatibility indications
PRECAUTIONS
Ð 5 Ð
EN
SETUP
SETUP
Connections
Connection to a TV
If your TV does not have AUDIO/VIDEO input jack, see the section ÒConnecting to RF Modulator (Not Supplied)Ó on the front page of the ownerÕs manual

VCR and Basic DVD Connection
Available for DVD only
DVD’s picture quality
analog audio
standard picture
good picture
better picture
TV
AUDIO IN
VIDEO IN
COMPONENT
COMPONENT
VIDEO IN
VIDEO IN
L
Y
Y
R
CB
PB
and
or
or
or
CR
PR
RCA audio cable
RCA video cable
S-video cable
component video cable
This unit
DVD
DVD/VCR
DVD/VCR
VCR
AUDIO
AUDIO OUT
OUT
L
L
R
R
VIDEO OUT
or
AUDIO OUT
VIDEO OUT
DIGITAL
DVD
S-VIDEO
VIDEO OUT
AUDIO
AUDIO OUT
COMPONENT
OUT
OUT
COAXIAL
S-VIDEO OUT
DIGITAL
DVD
OUT
AUDIO S-
OUT
COMPONENT
OUT
Y
COAXIAL
CB/
PB
CR/
PR
COMPONENT
VIDEO OUT
After connecting to your TV:
You will need to switch to video input on your TV. This is usually marked TV/VIDEO, INPUT or AUX

Please refer to your TVÕs ownerÕs manual for details

Input modes for common TV brands:
Listed below are inputs for common brand name TVÕs

Admiral:
AUX
Panasonic:
TV/VIDEO
Curtis Mathis:
LINE1, LINE2, 00, 90, 91, 92, 93
RCA:
INPUT, TV/VCR, 00, 90, 91, 92, 93
GE:
INPUT, TV/VCR, 00, 90, 91, 92, 93
Samsung:
TV/VIDEO
Hitachi:
INPUT, AUX
Sanyo:
VIDEO
JVC:
VIDEO, VIDEO1, VIDEO2, VIDEO3
Sharp:
00
Kenwood:
AUX
Sony:
VIDEO1, VIDEO2, VIDEO3
LXI-Series:
00
Toshiba:
TV/GAME
Magnavox:
AUX CHANNEL
Zenith:
00
– 6 –
EN
Connection to an Audio System
Playing 2 Channel Analog Audio
Playing Multi Channel Digital Audio
stereo system
Dolby Digital decoder,
Audio
MD deck or DAT deck
analog audio
L R
COAXIAL digital audio
input jacks
input jack
RCA audio cable
digital audio coaxial cable
DVD
DVD/VCR
AUDIO
AUDIO OUT
OUT
L
L
R
R
or AUDIO OUT
DVD
This unit
AUDIO OUT
OUT
OUT
VIDEO OUT
DIGITAL
AUDIO
S-VIDEO
COMPONENT
COAXIAL
DIGITAL AUDIO OUT
Connection
Setting SETUP > QUICK >
DOLBY DIGITAL
Connecting to a Dolby Digital decoder
BITSTREAM
for Dolby Digital audio output

Connecting to other device (an MD deck
or DAT deck etc.) without Dolby Digital PCM decoder

* To complete these settings, refer to pages 20-21

SETUP
Connection to an External Tuner
rear of TV
rear of the unit
external tuner
(cable/satellite box)
DVD
DVD/VCR
VCR
DIGITAL
AUDIO
S-VIDEO
AUDIO OUT
OUT
OUT
Y
C /
L1
R
R
COAXIAL
R
P
C /
P
DVD/VCR
AUDIO IN
RCA audio cable
AUDIO OUT
RCA audio cable
AUDIO OUT
VIDEO IN
VIDEO OUT
VIDEO OUT
RCA video cable
RCA video cable
Using the unit with an external tuner
1.Connect RCA audio and video cables to the audio and video output jacks of your external tuner and to the audio and video input jacks at the rear of the unit

2.Press [INPUT] on your remote control until “L1” is displayed on your TV

Note:
•Your cable/satellite box can be accessed only by connecting it to L1 (rear panel jacks) of the unit. Even if the unit is turned off, the signal from the external tuner is output to the TV through the unit

EN
Special note when connected to an external tuner:
•Only the active channel on your external tuner may be viewed or recorded when connected to this unit

Do not change channels during a recording. You cannot record on channel while viewing another

•Always use the LEFTaudio output jack from the external tuner to ensure that the audio is mixed down correctly to mono for this unit. If you use the RIGHT (red) jack, you will record the
–7 – right audio only

SETUP
Preparation for Use
Turning on Unit for the First Time
VCR
Please note: most instructions in this man-
ual refer to remote control use

1
Be sure your TVÕs input is set to VIDEO. (Name may
vary with TV manufacturer. See your TV manual for
details.)
2
Select your on-screen language

LANGUAGE SELECT
Then press [B] to continue

B ENGLISH
[ON]
STANDBY-ON
FRANCAIS
ESPA„OL
or
3
When ÒCLOCK SETÓ menu appears,
CLOCK SET
go to step 2 in ÒClock SettingÓ on this page

MONTH DAY
YEAR
1 0 / Ð Ð
Ð
or
HOUR MINUTE
AM/PM
Ð Ð : Ð Ð
Ð Ð
Clock Setting
VCR
1
Press [SETUP] and select ÒCLOCK SETÓ

- M E N U -
Then press [B] to go to next step

TIMER PROGRAMMING
SATELLITE LINK
AUTO REPEAT [OFF]
SETUP
B CLOCK SET
LANGUAGE SELECT
or
¥If the clock is not set, ÒCLOCK SETÓ menu appears when you press [SETUP]. In this case, go to step 2

2
Select the current month

MONTH
DAY
YEAR
CLOCK SET
Then press [B] to go to next step

1 0
/
- -
-
HOUR
MINUTE
AM/PM
or
- -
: - -
- -
3
Select the current day

MONTH
DAY
YEAR
CLOCK SET
Then press [B] to go to next step

1 0
/
0 7
-
HOUR
MINUTE
AM/PM
or
- -
: - -
- -
To Change the Selected On-screen Language
1
Press [SETUP] until the main menu appears

- M E N U -
B TIMER PROGRAMMING
SETUP
SATELLITE LINK
AUTO REPEAT
[OFF]
CLOCK SET
LANGUAGE SELECT
2
Select ÒLANGUAGE SELECTÓ

TIMER PROGRAMMING
- M E N U -
Then press [B] to go to next step

SATELLITE LINK
AUTO REPEAT
[OFF]
CLOCK SET
B LANGUAGE SELECT
or
3
Select ÒENGLISHÓ, ÒFRANCAISÓ or
LANGUAGE SELECT
ÒESPA„OLÓ. Then press [CLEAR]

B ENGLISH
[ON]
CLEAR
FRANCAIS
ESPA„OL
or
Note:
¥If you accidentally select Spanish or French and need English:
Press [SETUP] and choose ÒSELEC. IDIOMAÓ or ÒSELECTION LANGUEÓ. Press [B] and select ÒENGLISHÓ. Finally, press [CLEAR]

4
Select the current year

MONTH
DAY
YEAR
CLOCK SET
Then press [B] to go to next step

1 0
/
0 7
TUE
2 0 0 8
HOUR
MINUTE
AM/PM
or
- -
:
- -
- -
5
Select the current hour

MONTH
DAY
YEAR
CLOCK SET
Then press [B] to go to next step

1 0
/
0 7
TUE
2 0 0 8
HOUR
MINUTE
AM/PM
or
0 5
:
- -
- -
6
Select the current minute

MONTH
DAY
YEAR
CLOCK SET
Then press [B] to go to next step

1 0
/
0 7
TUE
2 0 0 8
HOUR
MINUTE
AM/PM
or
0 5
:
4 0
- -
7
Select ÒAMÓ or ÒPMÓ

MONTH
DAY
YEAR
CLOCK SET
1 0
/
0 7
TUE
2 0 0 8
or
HOUR
:
MINUTE
AM/PM
0 5
4 0
P M AM
B PM
8
Press [SETUP] to exit ÒCLOCK SETÓ menu

SETUP
Note:
¥To go back, press [s] during steps 2 to 7

¥Clock setting will be lost after a power failure, or this unit has been unplugged for more than 30 seconds

– 8 –
EN
Function Overview
Front Panel Indicator Lights
Lights up when the progressive scan system is activated

Lights up when the inserted disc
Lights up during a recording or one-touch timer
is being played back

Lights up when this
Blinks when an unplayable disc
recording (OTR). Blinks when a recording is paused

is in the DVD mode

is inserted

STANDBY-ON
OPEN/CLOSE
y
POWER ON
REC
TIMER REC
VCR
SCAN
PLAY
L - AUDIO - R
IR
h D C B
I
B
B
H
C
B G
REW F.FWD STOP/EJECT PLAY RECORD
TRACKING
SOURCE
PREV
STOP
PLAY
NEXT
Lights up when the unit is turned on

Lights up when this unit is in the VCR mode

Lights up when the timer recording or one-touch timer recording (OTR) has been set

Selecting DVD or VCR Operation
You must first select either DVD or VCR operation

VCR MODE
Press [VCR
] on the remote control. (The VCR SOURCE light will illuminate.)
OPEN/CLOSE
VCR
DVD
P-SCAN
PLAY
B
B
H
C
B
G
TRACKING
SOURCE
PREV
STOP
PLAY
NEXT
STANDBY-ON SPEED TIMER SET OPEN/CLOSE
1
2
3
TRACKING
4
5
6
7
8
9
CLEAR
INPUT
VCR button
0
+10
DVD MODE
DISPLAY
VCR
DVD
MODE
DVD button
PLAY
Press [DVD ] on the remote control

VCR
DVD
DVD SOURCE light
STOP
(The DVD SOURCE light will illuminate.)
RECORD
PREV
NEXT
PAUSE
VCR SOURCE light
TITLE
SEARCH
AUDIO
DISC MENU
OK
SETUP
ZOOM
RETURN
SOURCE
SUBTITLE
ANGLE
REPEAT
A-B
Front &t Rear Terminals
rear panel
front panel
STANDBY-ON
DVD
L1
y
DIGITAL
AUDIO S-VIDEO
AUDIO OUT
OUT OUT
POWER ON
REC
TIMER REC
COAXIAL
VIDEO OUT
L2
IR
h D C B
I
REW F.FWD STOP/EJECT PLAY RECORD
1: DVD AUDIO OUT* (analog) jacks
Connect an audio cable from here to the audio input jack of your television or audio device

2: DVD/VCR AUDIO OUT jacks
Connect an audio cable from here to the audio input jack of your television or audio device. Standard connection for DVD/VCR use

3: VCR AUDIO IN jacks
Connect a stereo audio cable from the audio output jacks of your camcorder, VCR, etc. to here. After making the connection, press [INPUT] on the remote control. Select ÒL1Ó to activate the rear AUDIO IN jacks, or ÒL2Ó to activate the front

4: VCR VIDEO IN jack
Connect a video cable from the video output jack of your camcorder, VCR, etc. to here. After making the connection, press [INPUT] on the remote control. Select ÒL1Ó to activate the rear VIDEO IN jack, or ÒL2Ó to activate the front

5: DVD/VCR VIDEO OUT jack
Connect a video cable from here to the VIDEO input jack of your television or audio device. Standard connection for DVD/VCR use

6: COMPONENT VIDEO OUT* jacks
Connect a component video cable from here to the component video input jacks of your television

7: S-VIDEO OUT* jack
Connect an S-video cable from here to the S-video input jack of your television

8: DIGITAL AUDIO OUT COAXIAL* jack
Connect